Sunday, May 26, 2013
A Celestron VX Comes to Chaos Manor South
Hokay, where
was we, muchachos? Uncle Rod had just returned from the Deep South Regional Star Gaze Spring Scrimmage. I had bagged a
passel of Herchels, well over 100, with my new OTA, Mrs. Emma Peel, a Celestron
Edge 800 C8. The scope rode on my time honored CG5 for the star party, but awaiting
me at home was what might possibly constitute the elusive more better gooder, Celestron’s replacement for the CG5, the VX German equatorial mount. It
had arrived on Friday, day two of the star party, and Unk was itching to try it
out.
As I told
y’all last week, even though I arrived back at The Old Manse by early
afternoon, I was tuckered out. I’d been up Sunday morning till after three shooting
Herschels, and was back up before
seven to pack. Twenty years ago, that was not a problem. Today? Takes me a while
to shake off the star party aftereffects. I puttered around, returning most of
the gear to its assigned places, took a long, hard look at the big box sitting
in the front hall, and decided I’d be better off waiting till the morrow to
open it.
Comes the
dawn, Unk was up bright and early, you betcha, and after a cup or two of java
to lubricate the ol’ mental gears, it was time to attack the VX. First order of
business was dislodging Growltiger
from his wonderful new sitting place,
which was the VX’s box. After an entire weekend of enjoying his box, the
striped cat was awful put out when I suggested he find another spot. All he did
was give me a dirty look. What finally got him going was when Unk pulled out
his knife and began cutting the box’s strapping. Growltiger did not like the sight of Unk armed with a
knife and decided discretion was the better part of valor.
OK, let’s get this thing open. More slicing with Unk’s knife
revealed—yet another box. Wisely, Celestron had double-boxed the VX, since the container
holds not just the GEM mount head, but an 11-pound counterweight and the whole
tripod. Inside, everything was in good shape. Step One would be getting the
tripod together so I’d have something to mount the VX on.
The tripod,
in its own slender box, was soon extracted. It was well protected with
Styrofoam inserts at either end and the whole shebang was covered with a
plastic bag. I did note the Styrofoam at the head end of the tripod had been
broken into two pieces thanks to the tender mercies of the Brown Truck Guys, no
doubt. There was no damage, and I soon had the tripod standing on its own in
Chaos Manor South’s front parlor.
If you own
an Atlas or a CG5, this tripod is going to be awful familiar. The VX tripod is
identical save for the peg on the tripod head. This peg, which gives the GEM
head azimuth adjusters something to push against, has been redesigned and
repositioned. It is covered with a layer of plastic, unlike the old bare metal
peg, and is located on the outer periphery of the tripod head. The manual now
gives instructions for repositioning it “over” a tripod leg instead of “between”
two if’n you feel the need. Supposedly, with it between legs, the tripod might
be less than stable, but I’ve never had that problem with a C8 payload and left
it alone.
Otherwise?
The tripod spreader/accessory tray is the same. The 2-inch steel legs and the
locks for their leg extensions are the same. The tripod tips are the same. The
hand control holder is the same (as on the CG5). If you’ve never owned one of
Synta’s standard field tripods, all I can say is that this is the best
inexpensive tripod I have ever used and is more than adequate for a GEM in the
VX—or even Atlas—class.
Rubber meets
road: get VX head on tripod. The GEM head, sans counterweight bar, was
nestled in its own box in a foam cutout, the whole thing protected with a layer
of thick foam. With some trepidation, I mounted the head on the tripod,
threading the central rod up into the hole on the head’s base. This is where
I’d run into trouble with my original VX—the hole was not properly threaded. On
this one, it threaded-in easy, same as my CG5 and Atlas and all was well.
The only
major assembly that remained was installing the declination counterweight bar. As
with the CG5, you thread the rod into the dec housing and secure it with the
large nut. The counterweight bar on the VX is not the same as the one on the
CG5. It’s the same diameter (larger than on the Atlas), but it is longer, five
inches longer, 14-inches instead of 9-inches. This makes packing more of a pain
but balancing easier. A C8 will balance on the VX with a single 11-pound weight
with adjustment to spare. On my CG5, it takes two weights.
The
counterweight itself? Yes, it’s an 11-pounder, but otherwise it is completely
different from the standard Synta pancake weights we all know and love. It is
of a much more modern shape, has a large easy to manipulate t-handle setscrew
knob, and, in a real fillip, Synta has protected the end of that screw/bolt
with Nylon so you don’t mar the mount’s counterweight bar.
It was now time to examine the hand control, which was well padded in its own
package. The HC shipped with this mount is Celestron’s new version, the NexStar
Plus, which brings both good and bad. The good is that it has more memory, a
faster processor, and a higher resolution display.
The “bad” in
the opinion of this old boy (and Thomas Aquinas, “Tommy,” Chaos Manor South’s
resident black cat, who didn’t seem impressed) is that the buttons have been
rearranged and relabeled to make them more “user friendly.” Famous last words,
those. Not only do we now, confusingly for old-timers, have “Back” instead of
“Undo,” the wonderful “M” and “NGC” buttons are gone. Now, you have to wade
through a menu to get to Messiers and NGCs. A Celestron symbol key has been
added that supposedly functions like a “shift” or “Ctrl” key, but I’m not sure
what it is good for at this time—if anything.
Finally, I noted the hand control cord is ridiculously short. Contrary to what you may have heard on the dadblamed Cloudy Nights BBS, though, it’s only an inch or so shorter than the (still too short) cable of the original model. All this is really of little consequence to me, since I will likely operate the mount with NexRemote almost all the time, just like I do the CG5.
Finally, I noted the hand control cord is ridiculously short. Contrary to what you may have heard on the dadblamed Cloudy Nights BBS, though, it’s only an inch or so shorter than the (still too short) cable of the original model. All this is really of little consequence to me, since I will likely operate the mount with NexRemote almost all the time, just like I do the CG5.
HC plugged
in, that left only two things in the big box, the manual and the accessories. I
did refer to the manual during assembly, but VX assembly is purty much
identical to that of a CG5, so a quick look or two was sufficient. I’ve never
seen a good manual from any telescope
maker, but the VX manual is an improvement, at least. If nothing else, it now
includes the instructions for doing an AllStar polar alignment the CG5 book
lacked. Since NexRemote is now
distributed freely on Celestron’s website, there was no NR DVD in the package.
There was one containing the basic
“First Light” edition of TheSky X.
How is that
program? I like it a lot; in fact it has replaced Stellarium as the “quick what’s up look” program at Chaos Manor
South. Actually, I probably like it better than I would the Professional
edition of TheSky X. I’m not likely
switch from SkyTools and Deep Sky Planner for serious work, after
all.
That left
the accessory box, which was in one piece, but had taken a bit of a beating
from the counterweight container, I suppose. Inside was an HC holder for the
tripod, a computer interface cable (first time I’ve found one in the box with a
Celestron-branded mount or scope), the declination cable, and a 12vdc power
cord.
The HC holder
is the same as the CG5’s. It snaps onto a tripod leg and does a good job.
There’s a hole in the bottom to pass a serial cable through to connect to the
HC. Nice, and always has been. The coiled declination motor cable is similar to
the one for the CG5. I’d like to have seen the dec connection routed
internally, but at least the VX’s cord is shorter and less likely to snag on
sumpin. Have to have a way to power the mount, of course, and the method
Celestron provides for the stock VX is a 12-volt DC cable with a cigarette
lighter plug on the end.
The 12vdc
cord is, like all other Celestron 12vdc cords, excessively long. I suppose they
think you will plug into your vehicle’s ciggie lighter. I urge you not to do that
at a dark site unless you want to be stranded. The CG5 was purty dadgum power
hungry, anyway. At least the cable is of heavier gauge wire than the CG5 power
cord. One other change is that there is now a threaded collar à la the CGEM on the scope-end plug.
That’s it
unless you choose to buy options. I have no use for a GPS receiver since I
mostly use NexRemote and NexGPS, so I didn’t pony up for that. I
did buy an AC power supply. I like to run on mains current down Chiefland way.
The supply for the VX (and CGEM, I believe) is a nice one that looks like a
laptop power brick rather than one of the old-timey wall warts. According to
its label, it can furnish the VX with five amps of juice, which is more than
enough.
New mount
assembled, the next thing I always do is a “fake” alignment inside the house to
make sure everything works more-or-less like it should. Before we do that,
howsomeever, let’s take a closer look at the VX’s GEM head.
As you-all
can see, this is not a gussied up CG5; it’s been redesigned. The RA housing is
much more modern looking, considerably better finished, and appears stronger.
The plastic RA motor cover is more attractive, much smaller, and less likely to
snag a cable. Same goes for the declination motor, which, unlike the one on the
CG5, does not rotate with the declination axis, a big help in reducing the
chance of snagging cables or rubbing on another part of the mount. A small but important improvement is that the
RA and declination index markers are a million
times easier to see in the dark than the pitiful labels on the older mount.
I never had
much trouble with the altitude and azimuth adjusters on the CG5, but they did
have small and hard to grasp knobs or were just bolts with minimalist handles.
The VX is mucho different, troops. Big knobs for the azimuth adjusters and the
rear elevation bolt, and a large T-handle for the forward elevation (locking)
bolt. The design of the VX allows you to tilt the head down for latitudes well
below 30-degrees, a problem with the CG5. Bigger knobs are also a feature of
the bolts that hold the OTA in the mount’s saddle. The CG5 had one bolt and one
safety screw. The VX has two bolts with large knobs, larger than those on the
Atlas EQ-6.
The VX
control panel has also been completely redesigned. It is now horizontal,
protruding from the RA housing east side, rather than vertical and on the motor
housing as with the CG5. The declination port has been moved from the control
panel per se, and is on the right side of the control panel housing facing up.
There is now less chance of the dec cable interfering with anything and much
less chance of plugging the declination into the wrong port as Unk has been
known to do. The connections on the panel are, from left to right, “Auto Guide,”
“HC,” “Aux 1,” and “Aux 2.” There’s a large but not offensively bright red LED
pilot light, and, wonder of wonders, an adult-sized power switch that looks
like it, unlike the CG5’s tiny, pathetic one, might last a while.
The VX’s
RA/Dec assembly, like that of any German equatorial, has to ride on a base that
allows it to be tilted up and down and turned side-to-side for polar alignment,
and the one on the VX is not only more modern looking than the CG5’s, it is
obviously sturdier. I don’t have much use for a latitude scale, but the orange
anodized one on this mount shore is purty. It’s easy to read, too, with a black
scale and numbers that stand out well against the orange. The elevation axle is
luverly: it is, like the latitude scale,
finished in orange anodizing.
Minor
details? Guess what the CG5 has that the VX does not? Setting circles. It’s not
like anybody ever used ‘em. Oh, and that “falls off if you look at it sideways”
cover for the rear of the RA housing? It’s been replaced with a nice molded
screw-on job. Finally, the forward cover for the polar bore now has a Celestron
symbol molded into it.
Big Milestone
One time: fake alignment. Tommy and I plugged the power cord into the mount.
The thread-on collar is nice, but we also took the precaution of gently spreading
the pin halves on the mount-side power connector a wee bit with a jeweler’s
screwdriver—ain’t never seen a Celestron other than the NS11 that didn’t need
that—and powered her up.
After a
short pause while the HC computer thought about this or that, the backlight
came on, and from there it was a two star alignment as per normal. Well,
almost. The higher resolution display on the HC has smaller characters that are
hard for my late middle-aged eyes to read. Apparently, you can adjust the font
size, but I ain’t tried that. I entered time, date, and location like always.
Only potential difference there is that, like the CGEM, the VX has an onboard
Real Time Clock that, if turned on, will keep date/time updated. Unk shall probably
leave it off since I will mostly use NexRemote,
which uses the PC’s date and time.
I told Miss
HC to begin a 2-star alignment, and things proceeded as they always do. I just
pressed “Enter” and “Align” when the mount stopped. I said she could forget
Calibration stars, and told her to go-to “M002.” Yes, it was annoying to have
to drill down one menu level to the Messiers, but she went right to the general
area where TheSky X said M2 ort ta
be. Success.
I know the
question you little rascals are itching to ask:
“Unk, how loud are the motors compared
to them screaming Mimis on the CG5?” You can hear for yourself. I filmed a
video of the fake go-to and put it on my cotton-picking Facebook page, but
suffice to say they are noticeably quieter than the notoriously loud CG5
motors, if maybe not as quiet as the Atlas EQ-6’s steppers (like the CG5, the
VX uses servo motors).
The only
true test of any piece of astronomy gear is in its natural habitat, an
observing field under the stars. I planned to do that this past Saturday night
at the Possum Swamp Astronomical Society dark site. Maybe. The weather
forecasts had looked iffy for a day or two, and on Saturday morning, when Miss
D. and I were off to Mobicon, The Swamp’s
yearly comic book/SF/anime/gaming convention, they were sounding worse. Whatev.
Lot of hours till darkness, and we would see what we would see. Amazingly, at 6
p.m. the sky did not look that bad. Unk loaded up the 4Runner, but only
minimally so: mount head, tripod, Edge 800
OTA, accessory box, utility box, eyepiece case, cupla jump-start batteries.
The hour’s
drive to the PSAS dark site was not unpleasant—when I didn’t look at the sky,
that is. The farther west I got, the more clouds I saw. Still, when I arrived
on the field at seven it didn’t look awful. A beautiful crescent Moon was
riding high, so I would be all by my lonesome this evening, but that was OK.
Given the conditions, my only goal was to align the scope and do a few go-tos
to verify its proper operation. One sweet
thing about buying an update to the C8 and an update to the CG5? It didn’t take
me any longer than normal to get the mount and OTA ready to go. Just a few
minutes and it was time to get my new finder aligned.
As I
mentioned to y’all last time, the design of the Edge 800’s finder mount makes
it prone to misalignment when you remove finder and ring mount from the tube
for storage. I don’t much like 50mm finders anyhow. I sure don’t need one on a
go-to rig; it is much easier to hit alignment stars with a zero-power (unit
power) finder like a Telrad.
Now, I love
the Telrad, you-all, but I must admit it does look a mite big and clunky and I
didn’t think one would look too classy on my beautiful Edge C8, Mrs. Emma Peel.
She deserved something more elegant,
I thought. But something as functional as the Telrad. That, I decided, was the Rigel Quickfinder. An “upright” style, red-reticle
rig. It’s smaller than the Telrad, and the base looks OK secured to the tube with
double-sided tape. I ordered my Quickfinder from one of my fave
astro-merchants, Agena Astro Products, who got it to me in time for the Saturday
tests.
Pointed the
scope at the windsock at the far end of the airfield runway and soon had the Quickfinder
aligned with my 16mm Zhumell and, after that, with the 12mm Meade reticle
eyepiece I use for alignments. I noticed almost immediately that the mount was easy
to work with unpowered. The C8 stayed where I pointed it much better than it
did with the kinda springy CG5.
Finder
aligned, I looked up, and was not exactly thrilled with what I was seeing. More
clouds. Darker, thicker clouds. I had intended to do a normal alignment, but I
wasn’t sure the sky was gonna last that long—it wasn’t yet dark enough to see
alignment stars. How about a Solar System Alignment, then? I fired up the
mount, selected “Solar System Alignment,” specified “Moon,” and the mount was
off for Luna.
She stopped surprisingly
close to our satellite—the VX was not even roughly polar aligned, just pointed
more or less north with my compass. I centered Diana up and hit align. Before
doing anything else, I wanted a good look at the pretty crescent. In my el
cheapo 16mm Zhumell 100-degree AFOV
eyepiece, she was beautiful. Dead sharp almost to the very edge of the field.
As I said last time, the Edge optics almost
make the sow’s ear Zhumell into a silk purse Ethos. But not quite. I removed
the Zhumell, inserted the 13mm Ethos (154x), and dern near had my socks blown
off. The terminator was tack-sharp from one field edge to the other.
I sent the
mount to Jupiter, and while the planet was close, it wasn’t in the eyepiece.
Which was what I expected. I really needed to do a Two-star to assure myself
about how well the mount would work. Looking north, I saw Polaris was in the
clear, so I lined up the hollow polar bore of the VX on the star while waiting
for a little more clearing. Those big altitude and azimuth adjusters were
indeed a joy to use.
So, I waited
and I waited. Just as I was about to give up hope, there was a sudden
semi-clearing at astronomical twilight. I judged there might be just enough
stars visible to do a real alignment. I cycled the mount’s power, returned it
to the index marks, selected “Two-star” and away we went.
The first
star, Capella, was close but not in the finder reticle’s middle circle when the
slew stopped. I centered her up, and the mount headed for star two, Procyon.
Very interesting. This time the star was
in the center circle of the finder. It was not in the eyepiece field (45-degree
apparent field at 166x). But dang close. Next were Calibration stars. I did all
four because I could, but I sure didn’t have to. Cal Star 2, Mizar (I’d had to
reject Spica, which was cloud-covered), was in the eyepiece field when the
mount stopped. So were stars 3, and 4. The CG5 has never done this well. Not at
f/10, anyway, for god’s sake.
Not only was
the VX’s go-to accurate—as slews to Jupiter and M35 showed—at f/10, she was
quiet, seeming even quieter than she had in the front parlor, if not
little-mouse-quiet. The only question in my mind now was “What shall we look at, Mrs. Peel?” The answer, alas, was “Not
much.”
The night
was steadily growing worse, with my new iPhone app, Scope Nights, now saying the remainder of it would be “poor.” One
more trip to the Moon, which was smack in the center of the 13mm, and I was
ready to shut down—and not just because clouds were now pouring in from the
southwest.
“What was the problem, Unk? Come on,
now…did you get spooked again?” Maybe I felt a little nervous on the
dark field as the clouds began to close in and make the night blacker than the
inside of Thomas Aquinas, but it wasn’t the
Mothman, the Little Grey Dudes from
Zeta Reticuli II, and the Skunk Ape that got me loading the gear
in a hurry. It was the little
monsters. The skeeters. I thought I had a can of Deep Woods Off in the utility
box, but I did not and I was simply being eaten alive. I was quite happy to be rolling back to Chaos Manor South
with Miss Van Pelt’s air-conditioner blasting. The bugs are back and so is the
humid Possum Swamp heat. Summer is here well ahead of Memorial Day.
Back in the
den, watching the pea-picking Ghost
Adventures and enjoying a dose of Unk’s favorite beverage, I was a happy and relieved little camper, muchchos.
Yes, go-to as implemented by Celestron is pretty foolproof (ahem) these days.
But you never do know. I told a buddy I’d be happy if the VX worked as well as
the time-proven CG5. The verdict after Saturday night is “better than the CG5.”
Maybe considerably better. I think this is the beginning of a beautiful friendship. I have a
Chiefland trip planned in a month or two, and I should know even more about the
new scope and mount combo after that. Y’all stay tuned.
In addition to the video, you can see
many more pictures of the VX unboxing on Unk’s Facebook Page.
Next Time: What this Country Needs is a Good Five Cent Cigar…
Sunday, May 19, 2013
The Herschel Project Nights 41 and 42
Is your Uncle
Rod crazy or just a little unrealistic? Either might be the case—or probably both,
muchachos. You have to be kinda crazy to attempt deep sky observing in Louisiana in the
spring. Humid? Yes. Stormy? You betcha. Bugs? Plenty of ‘em. Nevertheless,
that’s just what I contemplated doing at the Deep South Regional Star Gaze
Spring Scrimmage.
There were a
couple of reasons Unk decided to do the smaller, informal spring edition of one
of his favorite star parties. There were still plenty of Herschels, mostly faint galaxies in
Coma-Virgo-Hydra, that needed re-imaging with the Mallincam Xtreme. The pictures
I got with the old short-exposure black and white Stellacam were OK, but I can
do better with the Xtreme. An even bigger inducement? I had a new telescope who
needed a dark site first light.
As you know if you’ve been paying attention to The Little Old Blog from Chaos Manor
South, Unk had ordered a new Celestron C8. A C8 because he loves C8s and is still not too
lazy or feeble to get one out under the stars at the drop of a hat. Yes, I
already had three C8s, but my youngest, Celeste, was going on 20 years old, and
I figured a telescope with the modern StarBright XLT coatings might be A Good
Thing. If I was gonna order yet another C8, I also thought I oughta go whole
hog, pedal-to-the-metal, and update all the way with a Celestron Edge 800
“optimized” SCT.
There was
the mount question, too. I have two mounts suitable for an 8-inch Schmidt
Cassegrain: an Atlas EQ-6 and a
Celestron CG5. The Atlas is a wonderful mount, but it is also a heavy mount. For that reason, it tends
to only get used for DSLR imaging a few times a year (at best). The CG5 is also
wonderful. Amazing go-to accuracy, light, and perfect for use with a Mallincam.
The CG5 does have a lot of miles on it after almost a decade of heavy use,
though, so I thought it was about time to relegate it to backup status.
If I needed
a new mount, this was most assuredly the time to get one. Celestron had just
introduced the replacement for the venerable CG5, the Celestron Advanced VX. What does the newun bring to the table? It’s like the CG5 in many
ways, but has been redesigned from the ground up with a better-looking, better-finished
head. On the inside, the electronics, motors, and gears have been upgraded.
There’s even an adult-sized power switch. Suffice to say, Celestron has rounded
off those CG5 rough edges we complained about for so long.
Best part?
The price. Celestron has always given a break on mount/OTA combos, and that’s
still the case. For just under 2K you get a VX with all the fixings and a
beautiful Edge OTA. Compare that to the price of a CG5 - standard SCT OTA combo
a few years back, about 1650 simoleons. Hell, y’all, with a bargain like the
Edge/VX, I’d actually be saving money (uh-huh).
I pulled the trigger with my fave astronomy dealer, Bob Black at Skies Unlimited.
Mrs. Peel is set up! |
Buying a new
telescope and putting it in service is rarely a simple or easy thing, and this
was no exception. Oh, the OTA I received was perfect. The mount was a slightly
different matter. There was a small problem:
one of the holes on the GEM head was poorly threaded. A small problem,
but in a critical place: the hole that the tripod central bolt threads into.
If you are sure a new scope/mount will not have
problems, it really doesn’t matter where you buy it. Give Joe Spit the Ragman a
call at Telescopes ‘R Us if’n you like. Unfortunately, it’s never guaranteed
you won’t receive a problem child, not even if you’ve bought super-premium like
AP or Bisque. If you do run into
trouble, your choice of dealer is of critical importance. In my case, Mr. Black
got a new mount out the door and on its way to me ASAP. Unfortunately, while
Bob is an astro-dealer extraordinaire, he is not quite a miracle worker. The
replacement VX would not make it to Chaos Manor South till day two of the star
party.
So what
would I do? What would I do? Coulda
lugged the Atlas to Louisiana, but I settled on the CG5 instead. Its goto accuracy is frankly substantially better than that of the Atlas, which is very important when you are hunting the faint, small, and far away. Also, the CG5 can use the NexRemote telescope control software,
so I wouldn’t have to change my standard video observing routine. And I thought
it would be a good thing to give the mount a last workout before sending her into
semi-retirement.
The new C8
would be the star of my show at the star party, but I wanted to give her an
informal first light before we left. At the Spring Scrimmage, it would pretty
much be video all the way, which wouldn’t do anything to show off the scope’s main
strength: less field curvature and coma
due to an advanced corrector lens system built into the baffle tube. I packed
Edge and CG5 into the 4Runner and headed for my frequent observing companion Pat’s StarGate
Observatory across the Bay.
What did I
discover? Two things. The Edge is all it’s cracked up to be. You’ve heard
“refractor-like,” and I think that’s a fair description. The stars
were tiny and tight all the way across the field. Heck, she made my el-cheapo Zhumell
16mm 100-degree AFOV eyepiece act like a cotton-picking Ethos. While the seeing
was not perfect, from what I could tell the star test was as good as any I’ve
seen with a C8, and noticeably better than Celeste’s (sorry, old girl).
The second
thing? How amazingly good the CG5 still is. Yeah, when I was slewing, her
motors, and especially her declination motor, sounded like weasels with
tuberculosis. However, they’ve always sounded that-a-way. The important thing
was that she still put anything I asked for from horizon to horizon in the
field of a medium power eyepiece. That’s especially impressive since I had to
reject the first alignment star choices she offered due to trees at Pat’s now
somewhat overgrown observatory. It was as if the CG5 were trying to tell me,
“Unk, you don’t need no new mount. I’m as spry as I ever was.”
Not a bad case for 20 bucks. |
I also
needed a carrying case for the OTA, and I needed it now. Shoulda thought about that when I had time to order one
from JMI, where I got an excellent
case for my NexStar 11, but I didn’t. That necessitated a trip to Walmart for something that would serve. I’d originally thought I’d get a
footlocker like the early C8s came in and which undergraduates still carry
off to college. Alas, it was the wrong time of year for that at Wally-World. I
actually found something better, anyway, a big plastic box with handles and
wheels made by Sterilite. It only cost 20 bucks, and the foam from the Edge’s
shipping box fit perfectly. If it
holds up, I may not need to send Mr. Jim my money after all.
I felt like
I was as ready to go for the star party as I could be. Not that there wasn’t
one living room elephant sized question in my mind: Would
the Edge work with the Meade f/3.3
reducer I use for video imaging? What I’d read on the Internet seemed to suggest the
3.3 would work fine with a small chip camera like the Xtreme, but I wasn’t able
to find a definitive black and white answer to my question. Nevertheless, I
resisted packing Celeste in the truck as a backup. Instead, I tossed in the
eyepiece case. If the Edge wouldn’t focus with the reducer, I’d go visual.
Miss Van Pelt is packed! |
Departure
morning Thursday was easy. I’d packed Miss Van Pelt, the 4Runner, the night
before. All I had to do was grab a cuppa Joe and my suitcase and say goodbye to
Miss Dorothy. The Spring Scrimmage is simple and
informal. There are no talks, vendors, or prizes. Dorothy thought it was one
best suited to the hardcore observers and that she’d sit out this Deep South.
The trip
west and north to The Feliciana Retreat Center near Clinton, Louisiana was as
uneventful as uneventful could be. A total of three hours on I-10, I-12, and I-55
and I was pulling into the nice little facility, which is operated by the
Presbyterian Church. The first stop was the good, old observing field for gear
setup. Even with our full fall complement of observers, nearly 150 folks, the
field feels expansive. So, you can imagine how big it seemed with only five
scopes and three tailgating canopies on it. Kinda lonely.
The good
thing was that with so few of us on the field there was no competition for power outlets. With my new 100-foot
Walmart extension cord plugged into one, I’d be able to run everything except
the camera—mount, computer, dew heaters—on AC. I prefer to run the Xtreme on a
battery in the interest of getting the cleanest video possible.
After I’d got
the telescope and mount assembled, the canopy up, and all the rest of the junk
I carry to a star party arranged, I began to hear rumbling. It was not from the sky. Oh, there were plenty of clouds,
but no thunder yet. It was Unk’s tummy. I’d eschewed my normal breakfast stop
at MacDonald’s, you see, since it wouldn’t have been much fun without Miss D. Instead,
I’d settled for a couple of pieces of toast before I left home.
The field Thursday afternoon. |
Rumbly
tumbly banished, I took a critical look at the sky. I didn’t like what I was
seeing: clouds, lots of clouds, including some distinctly dark ones. Yes, the
weather forecasts I’d seen over the last several days had not been overly
encouraging, but I hadn’t expected Thursday to be quite this bad. Looked to me that if something didn’t change we would not
see a cotton-picking thing other than the insides of our eyelids Thursday
night.
Oh, well,
such is the life of an amateur astronomer. I tried to forget about the clouds and motored up to the Lodge to unpack in my room. One of the
best features of the Feliciana Retreat Center is its lodge, which, in addition
to a beautiful dining area, has a bunch of small motel-like rooms. As you may know, your uncle is way past staying in cabins,
even the FRC’s relatively nice “cottages,” unless he absolutely has to. If I am to have any hope of observing into the wee hours, I must get some rest during the day, and that is simply impossible for me to do in a group cabin, much less a freaking tent.
My little
room, “West 6,” was identical to those I’d stayed in on previous trips
to the DSRSG at the FRC and contained both a bunkbed and a twin
bed (we did get one with a double bed one year), small desk/dresser, bathroom
with a shower, sink in the room, and a couple of electrical outlets. There was
also an air-conditioner, which was only somewhat necessary in the
uncharacteristically cool May weather we were having. While the Center
technically has wireless Internet, their (satellite) connection can best be described
as “intermittent.” I unpacked my suitcase, changed into the new Pink Floyd
T-shirt I’d picked up at the Chiefland Wally-World last month, and headed back to the field.
The Lodge |
What did I
do there? Hung out with old friends shooting the breeze about many things.
While I didn’t care for the hard-right politics that was an obsession for some
of these folks, I joined in the discussion when the topic switched to old TV shows and movies. Heck,
there was even a little astronomy talk. In other words, I had a nice time with friends I see too seldom, and when the discussion turned to “right
versus left,” I recited a little mantra my old Granny taught me many a decade
ago: “Just like water off a duck’s
back,” and wandered back to my EZ-Up to continue arranging my gear.
I had a good
time practicing my sitting out on the field, but there were a lot of hours to
fill without talks and vendors and raffles; especially since
astronomical twilight would not arrive till after nine pm. When I got tired of sitting, I’d walk over,
uncover my pretty new telescope, who’d told me her name was “Mrs. Emma Peel,”
organize and reorganize my astro-junk, and sneak another peek at my watch.
Finally, it
was six and time for the first meal of the star party. While I’ve occasionally
been served something not to my taste, I can say I have never seen poor quality
food at FRC. It is, in fact, right up there with the best food I’ve eaten at
any star party. Thursday evening was no
exception: uber-tender pot roast, gravy-drenched mashed potatoes, green beans, and a salad bar
(yes, a salad bar at a star party). The only problem? So few of us and so much
food made it tempting to go back for seconds—or thirds.
The food was
good, but what I want on my star party menu is observing. Back out on the field after supper, it did not appear we were going
to get a single helping of that. The clouds were not scudding off at sundown as
they sometimes do; they were getting thicker. There was also an undeniable feel
of “rain” in the air. My pals and I stuck it out till just after ten, at which time
we began to feel the occasional raindrop. I tucked Mrs. Peel in in her Desert
Storm Cover and walked the ¼ mile back to the Lodge.
Just...YUM! |
Hope is often born
anew with the dawn, but I didn’t have any reason to feel hopeful when I
strolled into the dining room a little before nine for breakfast. The sky was
not dark, but it was cloudy, and the rain wasn’t torrential, but it was falling.
After a simple but good breakfast of eggs, sausage, pancakes, bacon, and
biscuits, I grabbed my umbrella and headed to the field to see how the gear had
fared.
Walking up to
the observing field, it was clear that while there’d been plenty of rain there
hadn’t been a downpour like in 2009 when the access road became a raging
river. On the field, my tailgating canopy along with everybody else’s was
standing unharmed. Yes, the observing table and camp chairs and everything
else were damp indeed, but I’d had the foresight to put anything that might be
harmed by moisture back in Miss Van Pelt before I’d left the field for the
first time Thursday night.
Cloudy Nights surfing. |
Other than
obsessing about the weather, Unk and everybody else spent the balance of Friday
much as we had Thursday: hanging out on
the field or in the Lodge, trying to get an Internet connection, and eating.
Lunch Friday was burgers that made Burger King’s Whopper look like a Krystal
(small, that is). That and a salad bar trip meant I wasn’t overly interested in a
supper that featured fried catfish, despite that being one of Unk’s faves. Not that I didn't have a little bite or two of catfish. What
else? Reading back in the room with Stephen King’s 11/22/63.
When sundown
came, there were still plenty of clouds, but they slowly, ever so slowly, began
to wander off. Before long, Polaris popped out and I did a rough polar
alignment, sighting the star in the hollow bore of the CG5’s RA axis. A little
more waiting and there were enough stars to do a go-to alignment. That was
where I ran into a slight snag. I’d aligned the Edge's finder at Pat’s, but I had no
doubt bumped it when I removed it to put the scope in the case. The mount is
nice, and is the first easily removable finder-mount I’ve seen from Celestron, but
its two-screws-and-a spring-loaded-peg adjusters design means you can knock it
out of alignment if you are not careful. I intend to supplement the finder, at
least, with a Rigel Quick Finder shortly.
I sent the
scope to Procyon, which was bright and in the clear, and with a little slewing
around with the Logitech Wireless Wingman gamepad I use as an HC thanks to NexRemote, I eventually got the way out
of focus disk of the star on the screen of the little DVD player that serves as the Mallincam's display. Would I be able to get it into focus? Yep. The scope focused
with the Meade f/3.3 with travel to spare. I noted that focus shift was minimal
to the point of being almost non-existent. Procyon nice and small, I adjusted
the finder, did the second alignment star and four Calibration stars, ran the
Polaris polar alignment routine, redid the go-to alignment, and was finally
ready to rock and roll.
The Southern Pinwheel |
I did over
thirty objects before ground fog and clouds shut us down completely around twelve After
the first couple of targets, I really got into that blessed zone: peer at Deep Sky Planner’s display, enter the
next object in NexRemote’s virtual
hand control, center it if necessary, record thirty seconds of video on my
little Orion mini-DVR, and on to the next target. Thanks to the Monster Energy Drink I'd guzzled at astronomical twilight, I still wasn’t a bit
tired at midnight, and could have gone on for several more hours if the sky had let me. It didn't, with clouds and ground fog spelling out that it was time to pull the Big Switch.
As I headed
for the Lodge, I ruminated on Mrs. Peel’s performance. The Edge business
shouldn’t have made any difference with the video camera's small sensor chip, but,
nevertheless, I thought my Xtreme images looked better than normal. Could just have
been my imagination, but I thought the stars were tighter and the colors more
vivid. While the Edge corrector wouldn’t help with that sort of thing, the
excellent star test and the superior XLT coatings just might.
Back in my
room, the Internet was still down hard, so I watched an episode of Star Trek (the original series), “Where No
Man Has Gone Before,” on DVD, sipping a little of the good, old Rebel Yell as I did so. I was going
to go on to “Charlie X” after that, but my peepers began to close and I was soon
off to night-night land.
Saturday
morning dawned and you could actually see the Sun. Oh, there were still white
fluffy things in the sky, but fewer of ‘em. After breakfast, I went down to the
field to see what was what. Table and chairs needed drying in the sun despite
the fact that no rain had fallen. The thick ground fog of the late evening was just about as bad as rain. As I
had the night before, I’d put anything that could be harmed by moisture back in
the vehicle when I'd shut down.
Mrs. Peel in the middle of a productive night. |
I admitted the
sky did not look great, but both the Clear Sky Clock and Scope Nights were
promising OK conditions for Saturday evening. Me? When I get to a star party I stay. Only one time over the years have I
left early, Saturday at DSRSG 1999 when it became obvious
there was not the slightest chance of the heavy rain stopping. I do understand
people have commitments and have to go to work on Monday. Still, leaving early is a sure
recipe for hearing those dreaded words from your pals:
“Well, heck, you know what?
Clear as a bell right after you left. Great night. One for the books.”
Believe it
or not, that’s just what happened. By late afternoon, there was no doubt in my mind that conditions would be better, at least, than they had
been Friday evening. After dinner, which consisted of the Center’s signature
dish, brisket, the sky began to clear big-time. About half our number had left, but
four more folks had arrived by late afternoon. There were eight other people on the field with me Saturday night, so I wasn't a bit nervous despite the fact that,
as we all know, the skunk ape just loves Louisiana's backwoods.
Scope
aligned, I began hitting Herschels. I had promised myself that if at all possible
I’d do 50 objects before throwing the Big Switch. When the 50 mark came, howsomeever,
it was still early, not quite midnight, the sky was holding, and, with the aid
of a Monster Energy Drink, so was the old bod. I passed 50, topped 75, and only reluctantly
decided to wrap things up when I passed 100 faint fuzzies. Even then, I drug my feet,
imaging M13, M97, M17, and M57, which were all surpassingly beautiful, before
pulling that accursed switch at 2:15 in the a.m. The only reason I quit then
was the prospect of packing and the drive home in the morning.
I won’t say
packing was fun Sunday. How could it be when the gear was nearly as wet as it
had been on the other mornings? While the ground fog was not thick enough to
shut down my observing Saturday, there was still enough of it to coat
everything with a thick layer of moisture. I moved what I could into the sun
and took a break for a minimalist breakfast of bacon, sausage, and biscuits. By
9:15, the gear was back in Miss Van Pelt and I was on the road for home. Was I
sorry to leave? I was, if not quite as sorry as I sometimes am. But
I had had a good time and I will be back for another scrimmage someday--maybe even next year.
The Lone Astronomer of Feliciana... |
I was up
bright and early Monday morning, like a kid on Christmas, got the mount
together, and was relieved to find it beautiful and flawless and indeed quite
an improvement over the ol’ CG5, it appeared. The details? That will be the
subject for next Sunday, muchachos.
You can see a lot
more pictures from the Spring Scrimmage on Unk’s Facebook page.
Postscript
What can I say about this one? In retrospect, this was one of the last great observing experiences I had at Feliciana. And maybe one of the best I had in the 12 years Deep South was at the site. What made it so great? Firstly, the feeling of freedom that came from realizing I didn't have to worry about getting up and going to work on Monday. And, maybe moreso, that it was a small gathering of committed astronomers. I am well past, I am somewhat sorry to say, the days when I enjoy big groups with plenty of people (God bless 'em) who are in the "Watcha lookin' at, mister? Can I see?" category.
Sunday, May 12, 2013
More Herschel Fun
Some more Herschel fun, anyway,
muchachos. If you live east of the Mississip, and especially below the
Mason-Dixon Line, you know observing in the spring is a roll of the dice.
Conditions can be nice for the
Virgo-Coma galaxies, but usually your results will be “mixed”—if’n you are
lucky. So it was for the 2013 Deep South
Regional Star Gaze Spring Scrimmage, the smaller, informal springtime
edition of one of our fave star parties. You’ll learn more about that next
Sunday, and you will also get a full report on Unk’s new C8, a Celestron Edge 800. But that is next Sunday, after ol’ Unk has had a
chance to rest up from his latest adventure. See y’all then—same bat time, same
bat channel…
Next Time: The Herschel Project Nights 41 and 42...
Sunday, May 05, 2013
On the Road Again
One of the
many things that are great about being retired from my daytime engineering job,
muchachos? It allows more time for what really matters: practicing, writing
about, and talking about amateur astronomy. When Phyllis Lang, author of Deep Sky Planner and an officer of the
Raleigh Astronomy Club of Raleigh, North Carolina, enquired as to whether I’d
be available to give a presentation for them, I was happy to reply that I dern
sure would be.
Which
presentation would that be? My Herschel show, “In the Footsteps of William and
Caroline.” That’s my current one, and turned out to be what the folks up yonder
in Raleigh wanted to hear, anyway. I am at work on a new talk about video
astronomy, and the Mallincam in particular, but I likely won’t have that ready
till time for this year’s Almost Heaven Star Party
in September, where I plan to debut it.
Anyhoo,
deciding to do a gig is easy. Getting there is tougher. I don’t have to tell
y’all about the state of the U.S. air travel system. Combine the TSA with the
money-hungry deregulated airlines and you do not have a recipe for pleasant air
travel. Pretty fur piece from the 70s when Unk was regularly flying the Pan Am
Champagne Clipper to the West Coast.
Two things made
the trip to North Carolina bearable. First was Phyllis getting me on the second
flight to Atlanta Friday morning instead of the way-too-early first one. Even
better was my realization that all I had to do was get to Raleigh in time to
give my presentation and make it back to The Swamp “sometime.” In the past,
I’ve always been stressed-out juggling the demands of that engineering job (YOU
WANT A DAY OFF? HELL, ROD, YOU JUST HAD ONE LAST YEAR!”) with what I really wanted to be doing. Now there’s no
need to beg for a day off. No business calls during my trip. No crises to worry
about. That was enough to make traveling to Raleigh almost fun.
Almost. When
you are flying out of Possum Swamp and headed for the East Coast, there are two
realities of Airline travel: you will stop in Atlanta (a little old lady
of my acquaintance says that when you die and are on your way to the Great
Beyond, you still have to stop in Atlanta), and you will fly Delta. Last time I’d been on one of their aircraft, last
year, I was somewhat impressed. This time, following their recent merger with
Northwest? Good and bad. At least the Friday flight out was on a full-sized jet
instead of a puddle jumper, but Delta’s boarding system ticks me off.
I understand
them boarding First Class first. You ought to get a few perks for them extra
bucks. But instead of boarding the rest of the plane after that, Delta has an endless variety of classes they board next: “Business Elite,” “Gold, Silver, and Diamond
Medallion,” “Skymiles Cardholders” and on and on and on. It’s terribly
inefficient and time-consuming. At least they didn’t try to charge me five
bucks for a bag of peanuts like one U.S. airline did last year. Sure makes me
long for British Airways.
Another gold
star for Ms. Phyllis: she got me aisle
seats all the way and arranged my flights so I had plenty of time between
planes in Atlanta. That can be a problem, since my connection is usually at the
extreme other end of that giant airport. Wonder of wonders, not this time. We
were wheels-down in “A” and my Raleigh flight was in “B.” Sat at the gate and
read the book I’d brought with me, Stephen King’s Black House, for somewhat less than an hour before it was boarding
time and I was off on the last leg.
My
impressions walking into the Raleigh – Durham airport? “Nice. Sure a lot bigger
than Possum Swamp’s pitiful aerodrome.” While Raleigh and The Swamp are comparable
in population, Raleigh is the state capital and has much more industry,
including high-tech industry, than we do, so it’s not surprising their airport
is a couple of clicks (at least) up from ours.
Next step
was retrieving my checked bag. Since the Atlanta flight out of The Swamp is
usually a small jet that requires you do a planeside baggage check, I don’t do
a carryon. No point to it. I have my laptop (this time my Asus netbook) with me
on the plane and that is it. I found baggage claim and my suitcase without too
much wandering around. Didn’t see anyone who looked like they might be Ms.
Phyllis, so I rang her cell phone. Turned out we were in sight of each other and
didn’t know it.
Shortly,
Phyllis and hubby Mark were delivering me to the airport Embassy Suites, where,
after just a little confusion on the part of a desk clerk who was a good
example of the Peter Principle (“Oh, you had a RESERVATION? I DON’T SEE ONE FOR
YOU. WHAT WAS YOUR NAME AGAIN?”), I had a room in which to relax for a few
hours.
This Embassy
Suites appeared to be an older member of the chain, a lot like the one Miss D.
and I stayed in in Nashville for ALCON 2003,
and that was fine. Nice big bed, LG TV in the bedroom, little sitting room with
another LG and a couch. I thought I’d check my email, connected to the wi-fi,
and immediately got a demand for $$$. Seems the Embassy Suites fancies
themselves a hotel, and believes that
means they can and should charge for Internet. Not this little black duck. Since I’d only be in the room briefly, I
said “NUH-UH, YOU SUCKAS,” and proceeded to check my mail with the iPhone.
Good thing I
did, since there was a missive from astronomy-dealer extraordinaire Bob Black
of Skies Unlimited. He was letting me know
my NEW TELESCOPE would be on its way to Chaos Manor South shortly. New telescope? Yep. A new C8. “Dagnabbit!
A new C8, Unk? How many cotton-picking
C8s do you have already?” Three. The C8 is my favorite telescope of all time.
I’ve never loved a scope like I’ve loved the C8, but why did I need yet anudder
one?
There was
actually some logic behind my acquiring another C8—as much logic as Unk ever
displays, anyhow. It was really more about a mount than a telescope. As y’all
know, one of my most-used telescope mounts has been the humble Celestron CG5 go-to
GEM. It’s done more than its share of the work of the Herschel Project. I’ve
put a lot of miles on the mount in the eight years I’ve had it. Not that it
doesn’t work as well as it ever did—it does—but when Celestron recently came
out with an improved CG5, the VX, I
thought it might be a good time to relegate the high-mileage CG5 to backup
status.
So where did
another C8 OTA come in? Why not just slap my 20-year-old Ultima OTA, Celeste,
on the VX and keep on trucking? Certainly, I could do that. Celeste continues
to amaze with how deep she can go with the aid of a Mallincam Xtreme. But… I’d
been thinking it might be cool to have an OTA with modern coatings—Celeste is
my youngest C8—and the scopes are mighty cheap when bought paired with mounts.
The question was “Which C8?”
A while back,
I’d been thinking idly about the Celestron
Edge OTAs. Mighty purty with their white/blue-gray tubes. And that beauty
is not just skin deep. An onboard corrector in the baffle tube reduces both
coma and field curvature. Would I want one? From the first look I had through a
Meade RCX in ’06, I knew there was something to this “improved SCT” bidness.
Using my buddy Mike Harvey’s LX200 ACF just reinforced that. The views through
the eyepiece were simply better. And…
The Meades only correct for coma, not field curvature. The Celestron Edge ought
to be even more better gooder. I decided that if time came to buy a new SCT OTA
I’d be foolish not to get an Edge.
As I was
ruminating on the above, I happened to open the then-current Sky and Telescope. What was staring me
in the face in a full-page ad? A beautiful Edge 800 C8 on a VX mount. Well, I
did need to replace that mount, and shouldn’t pore ol’ Unk get a retirement
gift of some kind? Shortly, Mr. Bob had my credit card number. By the time you
read this, there should be a new SCT at Chaos Manor South and you will hear a
lot about it over the coming months, I’m sure.
I was
excited my new scope was on her way to me, but I was also tuckered. I turned on the TV, collapsed on the couch, set the alarm
on my iPhone for 4:00 p.m., and proceeded to doze the rest of the afternoon
away, visions of Edge HDs dancing in my head as CNN droned on unheeded.
Seemed as
Unk had barely closed his peepers when the iPhone began emitting the full
volume klaxon that is the only thing that will wake him up on occasions like
this. Dressed, it was time to prepare for the big show. Netbook operational?
Check. PowerPoint file still working? Check. Backup copy on my flash drive
still there? Check. Black cowboy hat on head? Check. I was out the door.
My hosts
knew I needed a little supper before going on, and spirited me off to a nearby
pub, “Tripps.” It was a local chain in the Ruby Tuesday’s/Applebee’s/TGI
Friday’s mold, but a cut above those in quality, Unk thought. What caught my
eye in the menu was the prime rib
sandwich. That and a couple of Kolorado Kool Aids, but only a couple, and I
was ready to go on. Rarin’ to go on in fact.
I’ve done my
little shows (“presentation” doesn’t really describe Unk’s usual shenanigans)
at some good venues over the years. Portland’s Kendall Planetarium comes to mind. The
North Carolina Museum of Natural Sciences took the cake and the prize,
though, y’all. Big theatre with a powerful LCD projector at the back, excellent
P.A. system—I prefer to work with a mic whenever possible—and, most of all,
expert assistance from the RAC’s AV person. What a treat it was to see my
PowerPoints giant size.
Getting my computer
slides ready was as easy as it’s ever been, so I had a little time to wander
the museum’s exhibit area. Since Raleigh is home to the Research Triangle and
The University of North Carolina at Chapel Hill is nearby, I was not surprised
they had a high-quality science museum, but it was still a surprisingly
wonderful place. I hope the residents appreciate it and their kids love it.
Then it was showtime. Starting with Unk’s usual corny jokes and other foolishness: “Before we get started, I want a show of
hands; how many of y’all have ever owned
a Lynyrd Skynyrd Album?” From there, I was on to the story of the Herschels
and the Herschel Project for somewhat over an hour. The audience was
responsive, and there was a good turnout considering the somewhat esoteric
subject, observing all 2500 Herschel objects. Another twenty minutes or so of
questions, and it was back to Tripps.
This
excellent club always repairs to a local restaurant for their “meeting after
the meeting.” Phyllis asked me whether I was up for another visit to Tripps. I
said I was dang sure not hungry after the prime rib sammich, but that if drinks
might be involved I would dang sure be happy to attend. She assured me they
would be, and I spent a couple of hours having fun and drinking draft Blue
Moons (the perfect beer for astronomers, natch). I talked everything from the
cost of a good eyepiece to the minutiae of the Sherlock Holmes stories and had
a Real Good Time with the big RAC group.
One thing I
took note of? Many of the questions I was asked during the Q&A after the
talk and at the restaurant had to do with video
astronomy. Naturally, I talk about deep sky video cameras in “In the
Footsteps of William and Caroline,” since the Mallincam and the Stellacam were
such a big part of The Project. Even those folks who obviously didn’t care
pea-turkey about tackling the H2500 were eager to hear about video. Seems to me
it is catching on in a big way and is spreading way beyond the borders of the
Billy Dodd Field at the Chiefland Astronomy Village.
And so it
went for quite some time. I beat my turns-into-a-pumpkin time of midnight, but
just barely—maybe. Leaving Tripps, I glanced at my watch. I believe it read
“11:30,” and I had not set it to Eastern Time. Oh, well, I’d had a splendid evening
with a big bunch of friends, and my nap earlier stood me in good stead. Still,
as soon as my head hit the Embassy Suite’s pillow, I was off to night-night
land with barely a glance at American
Pickers, which I’d dialed up on the fracking cable TV.
At nine the
next morning, Phyllis and Mark picked me up and delivered me back to the
airport. My flight wouldn’t board till 10:30, but I like to have plenty of time
to clear security and find my gate. On Saturday morning, the airport wasn’t
busy and I more or less breezed through and was soon back to reading Black House and waiting to board for the
return to The Swamp.
The trip home
was uneventful, with the only real tiresome part being the last, the flight
from Atlanta to The Swamp. Unlike Friday, I was on a puddle-jumper jet, the
ride was rough, and the cabin was hot. That was OK, though. Almost there. When I finally walked
through the portals of The Old Manse, I was surprised at how rested I felt. Not
having to face the start of a workweek at the dadgum shipyard did indeed make a
big difference.
I was
famished, though. I’d had nothing since a modest breakfast at the Embassy
Suites. I’d planned to fill up on junk at the Atlanta Airport, Popeye’s chicken
or Checkers burgers, but had had to go without lunch. The concourse where my
gate was was being remodeled, and the only restaurant other than
sit-at-the-table-and-a-waitress-comes bars and grills was a freaking Quiznos.
No thanks. Since I didn’t feel tired, I eschewed my usual after-splashdown
supper of Chef Boyardee and hustled Miss D. off to Buffalo Wild Wings, where I ordered a dozen boneless wings (wild)
and gobbled every one of them suckers right up.
Back home, I
still wasn’t ready to call it a night. There was that DVD. Before I’d got out
of the Langs’ van, Phyllis had handed me a disk containing version 6 of her
famous astronomy program, Deep Sky
Planner. Deep Sky Planner 5 was
one of two programs, along with SkyTools
3, that got me through The Herschel Project. Frankly, without those two
softs I’m guessing I still wouldn’t be done.
As y’all know
if you read my blog entry on DSP or my
review of Version 5 in Astronomy
Technology Today, I liked Phyllis’ program a lot. You also know what a
nit-picking old fuddy-duddy I can be, and there were two things I did not like about the program. Most
irritatingly, when you wanted to download Digitized Sky Survey images of list
objects, you had to do them one at a time. That’s OK for a 50 DSO list, but
2500 fuzzies? No way. I also found the import utility lacking, and wished for a
way to easily convert ascii files of deep sky objects to observing plans. Would
those two minuses be turned into pluses in 6? I wanted to find out.
One thing I
was happy to learn about DSP 6 once I had it installed and running? It don’t
look much different from 5. It was obvious I wouldn’t have to learn the program
from scratch. I was also pleased it loaded my DSP 5 observing plans without
complaint or need for conversion. How about that import routine? Would it be
any better?
To find out,
I exported a SkyTools 3 list, “Best
of the Herschel 2500,” as a text file. Opened the import widget, told it the
file name to import, what to call the output file, where to put it, and mashed
the “go” button. In just a few seconds, I had a DSP 6 plan. Every one of the
objects had been squirted into DSP format. It was so easy, I couldn’t resist
converting a longer list of 250 “H2500 Objects Left to Image” to DSP format.
Again, the import facility worked flawlessly.
OK, I was
willing to concede DSP’s import utility was now world-class. How about the
dadgum image retrieval? With just a little fumbling and bumbling (What? Me read a help file?) I found a button
that would download images for all the “left to image” list’s DSOs at once. No
fuss, no muss. In just a few minutes, pictures for all 250 Herschels were saved
and ready for use. Not only did the image retrieval work, it worked fast.
What else? I
am sure there is much other New Good Stuff in DSP 6, but other than the above,
what impressed me was that the program’s performance seems better. Maybe it’s
just me, but everything seemed a little zippier in 6. One of the big draws of
the new version according to Ms. Lang is that she has put a lot of work into
improving the accuracy of the program’s catalogs. Which is good to hear. To
some extent, planner programs live or die by the accuracy of the data in their
huge databases.
‘Course what
really matters is how a program does on a dark observing field, and DSP will
get its chance Real Soon Now. I’ve decided that it will be “DSP 6 only” at the
upcoming Deep South Regional Star Gaze
Spring Scrimmage, which kicks off shortly. Yep, Unk will be using a new
planning program, a new telescope, and a new mount for the star party. Is he
brave or just crazy? Time will tell muchachos, time will tell.
As usual, you-all can see a lot more pictures from ol' Unk's trip on his pea-picking Facebook page...
Next Time:
Still More Herschel Fun…